- Category
Clamping blocks
Clamping blocks for isel ball screw
isel clamping blocks were specially developed for the ball screws developed by isel Germany and are made of robust and burnished steel. They are slid over the ball screw nut and reliably fix it in the desired position. This further increases the high precision of the isel ball screws. The linear drive is lubricated via the grease nipple integrated in the clamping block.
.
Do you have any questions?
-
Spannblock 1 für Rundmutter - Kugelgewindespindel Ø12mm (Fußbefestigung)€33.40Excl. 19% VATIn stock
-
Spannblock 1 für Rundmutter - Kugelgewindespindel Ø16mm (Fußbefestigung)€33.80Excl. 19% VATIn stock
-
Spannblock 1 für Rundmutter - Kugelgewindespindel Ø20 mm (Fußbefestigung)€54.30Excl. 19% VATIn stock
-
Spannblock 1 für Rundmutter - Kugelgewindespindel Ø25mm - Steigung 5mm/10mm (Fußbefestigung)€57.40Excl. 19% VATIn stock
-
Spannblock 1 für Rundmutter - Kugelgewindespindel Ø25mm - Steigung 20mm (Fußbefestigung)€76.00Excl. 19% VATIn stock
-
Spannblock 2 für Rundmutter - Kugelgewindespindel Ø12mm (Flanschbefestigung)€50.40Excl. 19% VATIn stock
-
Spannblock 2 für Rundmutter - Kugelgewindespindel Ø16mm (Flanschbefestigung)€53.00Excl. 19% VATIn stock
-
Spannblock 2 für Rundmutter - Kugelgewindespindel Ø20mm (Flanschbefestigung)€55.90Excl. 19% VATIn stock
-
Spannblock 2 für Rundmutter - Kugelgewindespindel Ø25mm - Steigung 5mm/10mm (Flanschbefestigung)€57.40Excl. 19% VATIn stock
-
Spannblock 2 für Rundmutter - Kugelgewindespindel Ø25mm - Steigung 20mm (Flanschbefestigung)€95.00Excl. 19% VATIn stock
Find the appropriate clamping blocks with base or flange attachment.
Adjustment and lateral lubrication
- Ø 12, Ø 16, Ø 20 - Pitch 2,5 / 4 / 5 / 10 and 20 mm
- Ø 25 - Pitch 5 / 10 mm
- Ø 25 - Pitch 20 mm
isel drive elements are produced in a vast range of lengths, diameters and screw pitches. Through the combination of ball screw and ball nut they work effective and with very low friction.