Tool and Material Cooling - COOLMIN
Dry cutting is today the first choice for many machining tasks.
Hitherto, materials, tool wear and surface finish have often necessitated cooling with appropriate coolants / greases.
This always means moisture. Even minimal moisture spray cooling causes unwanted effects such as the build-up of dirt and the adhesion of swarf to the cutting tool or to the working surface and can lead to the deterioration of the material surface structure, depending on the material being machined.
Our patented tool and material cooling - COOLMIN ensures adequate tool and surface cooling and reduces such effects to negligible levels. This keeps the swarf dry and, depending on the material, easy to remove by either blowing or vacuuming.
Surfaces are therefore protected and, as a result of direct tool cooling, tool life is significantly increased (also suitable for tools with integrated cooling).
The main component of our ool and material cooling - COOLMIN is a cold air nozzle, which operates on the eddy current principle and separates warm air from cold. The system is powered by air pressure alone (6 to 10 bar).
- Pressurized inlet: 6-10 bar
- Cool air outlet: of up to -25 °C
- Warm air oulet: up to max. 70 °C
- Air use approx. 150 l/min
Subject to technical modifications without prior notice.
|with hose, including maintenance unit and shut-off valve (manual)||239011 0119|
|including maintenance unit and electrically activated valve||239011 0117|
Simply register and log in, search and find the component you need and download the data.
The download is free of charge.