Torque motor iTM 180
Highlights
- High torques from speed 0
- Small installation space, as no gearbox is required
- Backlash-free, robust, maintenance-free and smooth-running
Features
- Energy-efficient due to low losses
- Completely ready for use in a ready-to-install housing
- Hollow shaft for the media feed-through
- Convection cooling
- Integrated measuring system
- tested in accordance with EC 73/23/EEC, EN50178 and EN60204
Options
- absolute measuring system with BISS-C interface - default setting data 24bit + 14bit (24bit absolute, 14bit resolution in pole)
Clamping plate made of die-cast aluminium, Ø 250 mm and Ø 500 mm
For applications that require high torques.
Torque motor iTM 180
The iTM 180 torque motor is the ideal solution for applications where high torques are required from speed 0. By dispensing with a gearbox, this motor is characterised by a particularly small installation space and at the same time offers backlash-free, robust and maintenance-free performance. The quiet running of the motor also ensures smooth operation.
Energy efficiency is a top priority for this product: the iTM 180 torque motor impresses with low losses and is therefore particularly environmentally friendly. The completely ready-to-use housing enables easy integration into your systems. Thanks to the hollow shaft, media can be fed through without any problems, while the convection cooling ensures optimum temperature regulation. An integrated measuring system ensures precise monitoring and control of your processes.
The iTM 180 torque motor fulfils the highest safety and quality standards, tested in accordance with EC 73/23/EEC, EN50178 and EN60204.
We also offer you customisation options: choose an absolute measuring system with BISS-C protocol or opt for a die-cast aluminium clamping plate with a diameter of either 250 mm or 500 mm, depending on your specific requirements.
- Swivelling axes
- Rotary indexing table
- Metrology
- Positioning
| iTM 180 [48V] | |
|---|---|
| Nominal voltage [VDC] | 48 |
| Rated current [A] | 7,4 |
| Nominal power [W] | 350 |
| Rated torque [Nm] | 15 |
| Peak current [A] | 18,5 |
| Peak torque [Nm] | 38 |
| Rated speed [rpm] | 220 |
| Max. speed [rpm] | 260 |
| Winding resistance (phase-phase) [Ohm] | 1,1 |
| Motor inductance (phase-phase) [mH] | 1,4 |
| Voltage constant [V/min-1] | 0,128 |
| Torque constant [Nm/A] | 2,11 |
| Number of poles | 40 |
| Thermal protection optional | Optional |
| Moment of inertia (rotating parts) [kg/m2] | 0,0085 |
| max. axle load / max. radial load [N] | 3100 |
| Protection class | IP40 |
| Hollow shaft diameter [mm] | 45 |
| Axial run-out accuracy [mm] | 0,05 |
| Dimensions (LxWxH) [mm] | 199 / 188 / 92 |
| Weight [kg] | 8 |
Torque motor iTM 180
Your contact
Thank you for your interest in our product. We are very pleased. Please write to us or call us for further information.
