isel linear guides versions LFI - Linear guides, LSA - Linear guides, LFV - Linear guides, LSK - Linear guides, LFS - Linear guide rails with linear slides, linear guide rails, aluminium slides and all necessary accessories are all manufactured in the isel plant in Eichenzell and are perfectly matched due to their common production.
The installation position is freely selectable, however all forces and moments arising should remain below the maximum rates for the respective axis. In the continuous operation all linear guides are designed for ambient temperatures up to 60° C, in the short term also for temperatures up to 80° C. Usage at temperatures below the freezing point is not possible.
Linear guides from isel consists of extruded aluminum profiles, which are aligned with the aid of leveling plates or mounted on a appropriate finely machined contact plate. The tolerances are in the range of 0.1 mm / 1000 mm.
Linear slides from isel are optionally supplied with Aluminium or steel body and are available in standard lengths of 70 mm, 100 mm, 150 mm and 200 mm. All slides are based on a ball principle, the balls move play and noise-free.
Linear guide rails from isel are aluminum / steel composite systems of aluminum extrusion profiles according to DIN 17615 and are available with a diameter of 8 mm, 12 mm or 16 mm and a hardness of + 2HRC.
The Aluminium slides from isel are ideal for building complex multi-axis constructions for handling and processing and covers many possible applications with a wide range of models.
Galvanized tapped rails and sliding nuts, linear ball bearings, grease, guides shafts or rollers: With the matching accessories you can increase the performance of your linear technology. Contact us!
Bitte warten ...